Uneven speed of the material hoist -- block: the reason is that the feed starts before the start, the winnowing belt slips due to insufficient tension, or the feed flow exceeds the conveying capacity (including excessive return), and large pieces of material enter the base.
The elimination method is to stop the machine immediately, close the material door, open the socket plate under the frame, put the blocked material, and restart according to the operating procedure. And adjust the tensioning device to strengthen the cleaning of materials on the road.
Second, uneven speed of the material elevator -- reduced conveying capacity: the reason is that the material elevator drive belt or lifting belt skidding, insufficient motor speed, uneven feed, serious return and unreasonable choice of winnowing hopper form. Troubleshooting methods include adjusting the tensioning device, checking the motor, troubleshooting, evenly feeding, finding out the cause and discharging in time, and rationally choosing the winnowing hopper.
Third, the speed of the material elevator is uneven - too much back: the reason is that the speed of the lifting belt is too fast or too slow, the size of the head form is not appropriate, the discharging port is not smooth. The solution is to adjust the speed of the main shaft, modify the size of the nose or adjust the flow plate to vent the vent.
Fourth, the material elevator speed is not uniform - housing wear is serious, power consumption is too large: the reason is that the material elevator bearing installation skew, bearing ash, poor lubrication, bearing damage or bucket elevator lifting belt is too tight, too much back material, block. The elimination method is to readjust, clean or re-replace the lubricating oil, replace the bearing and adjust properly. Find out the cause, remove in time, remove the blockage.
In the process of using bucket elevator equipment to transport materials, it is found that the speed of the elevator can not maintain a uniform and stable state, so that we realize that there must be a fault inside the bucket elevator. But in fact there are a variety of factors will cause the bucket elevator speed is not uniform, the way to solve the problem is also different.
The above is all the content brought to you by the vibrating screen machine manufacturer, thank you for watching.