新闻资讯

News Center

current position: Home > News Center > Corporate news

Supplier: Round swing screen equipment main features and cleaning knowledge

2023-02-09 09:55:33
times

Today, the small edition of the swing screen supplier takes you to understand the main characteristics of the circular swing screen equipment and cleaning common sense.


Key points for selecting a circular swinging screen:


1. Damping spring as a connection screen frame and base accessories not only play a connection role but also play a role in reducing resonance, cushioning, commonly used vibration spring material for steel spring, according to the equipment model is different and composite spring and rubber spring.


2. The sealing strip can seal and cushion the upper and lower screen frames. Now commonly used is silicone rubber strip, sealing strip specifications are also different. Therefore, buy according to the diameter of the screen frame.


3. If the installation position of the motor is reasonable, the height and installation position of the equipment can be determined. The selection can be made according to the installation position.


4. Output is the basis for determining whether a piece of equipment is qualified. The output of the device and the diameter of the screen surface. The larger the diameter of the screen surface, the higher the output, so please choose a reasonable choice according to the production requirements.


Circular swinging screen cleaning method:


1. When cleaning the swinging screen, the sound intensity should be controlled at about 1w-2w/mm2, which also has a great impact on the cleaning effect.


2. Generally, the lower the frequency is, the more obvious the cavitation effect is, but the noise is relatively high. It is more suitable for objects with relatively flat surfaces. The higher the frequency, the worse the cavitation effect, but the noise is relatively low. Objects and electronic crystals are more likely in microporous blind holes.


3. When cleaning the shaking screen, fine powder may be hidden in all corners of the screen machine, and should be carefully cleaned in the cleaning process without any fine corners.


4. When cleaning the circular swinging screen equipment, the water temperature should be controlled between 30°C and 50°C. This temperature is good for cleaning.


5. When cleaning the shaking screen, high viscosity cleaning liquid should be used. The higher the viscosity of the cleaning solution, the higher the internal gas content, the better the cleaning effect.

Swinging screen equipment

Recently Viewed:

news.related_news