Screw conveyor equipment maintenance and maintenance? Swing screen manufacturers take you to understand

How do the maintenance and maintenance of screw conveyor need to do? Swing screen manufacturers to take you to understand.

First, daily maintenance content expansion requirements

1. Remove the dirt from the outside dead corners of the equipment, keep the surface of the equipment clean, and remove the debris on the equipment.

2. Check the fastening of bolts of all parts, and tighten them in time if they are loose.

3, check the concentricity of the coupling and the wear of the pin shaft and rubber ring, if wear should be replaced in time, and adjust the concentricity.

4. Check the lubrication of each running part and fill lubricating oil (grease) in time.

5, check the sealing condition of the machine cover, if there is oil leakage phenomenon should be dealt with in time.

6, check the oil amount of the reducer, lubricating oil should be added in time.

Two, two level maintenance content and requirements

1. Execute all the contents of daily maintenance.

2. Check or replace the hanging point of the hinge dragon.

3. Check the head and tail bearings, add grease or replace the sealing ring.

4. Check the wear degree of another part of the transmission part, and replace it when the wear exceeds the standard.

Three, intact standard content

1, normal operation, all parts of good lubrication, no sound, good efficiency.

2. The equipment capacity can reach more than 90% of the design capacity.

3, the machine is complete, safe operation to the secondary maintenance interval.

4, the accessories are complete and good, and the equipment is clean and sanitary.

5. Complete fragile spare parts, accurate and complete technical data (equipment ledger, maintenance records, drawings).

Spiral pipe conveyor equipment manufactured by swing screen manufacturers is welded in a cylindrical shell with continuous spiral blades, and the shell rotates with spiral blades. Add the material due to the role of centrifugal force and friction with the housing rotation and is lifted, in the material under the action of gravity and along the spiral surface slide, so that the material with the spiral tube rotation together to achieve the forward movement of the material, as the screw along the rotation of the nut translation movement, to achieve the purpose of conveying materials.